* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livraison standard gratuite pour les commandes de plus de 9,9 $
Politique de retour
Les articles retournés seront acceptés dans les 40 jours suivant la réception des marchandises. Les articles personnalisés ne peuvent pas être retournés ou échangés. Les articles achetés avec une carte-cadeau électronique ne peuvent être échangés que; les remboursements ne sont pas applicables.
Cadeau gratuit
Bienvenue sur Roymall, votre site Web professionnel pour l'achat de cadeaux de grand magasin premium. Nous apprécions et valorisons grandement votre soutien, et nous voulons exprimer notre gratitude en ajoutant une touche supplémentaire d'excitation à vos achats. Lorsque vous magasinez avec nous, vous profitez non seulement de produits de haute qualité qui améliorent votre style de vie, mais vous recevrez également un cadeau gratuit exclusif avec chaque commande que vous passez. Prêt à explorer notre collection et à trouver vos cadeaux parfaits ? Parcourez notre sélection d'articles de grand magasin premium, passez votre commande et attendez avec impatience l'excitation de recevoir votre cadeau gratuit avec votre achat.
Politique d'expédition
Nous nous efforcerons de vous livrer les articles après réception de vos commandes et de nous assurer qu'ils arrivent en toute sécurité. Les détails de livraison seront fournis dans votre email de confirmation.Dans la plupart des cas, les commandes sont traitées dans les 2 jours. Dans des circonstances spéciales, cela peut être retardé comme suit : Lorsque vous passez une commande le samedi, le dimanche ou un jour férié, cela sera retardé de 2 jours.Normalement, il faut 5 à 7 jours ouvrables (du lundi au vendredi) sans être affecté par un retard de vol ou d'autres facteurs environnementaux.Parce que notre service d'expédition est mondial, les délais de livraison dépendront de votre emplacement, donc cela peut prendre quelques jours et veuillez patienter si vous êtes dans des districts ou des pays éloignés.
1. Politique de retour et d'échange
Nous n'acceptons que les articles achetés sur roymall.com. Si vous achetez auprès de nos distributeurs locaux ou d'autres détaillants, vous ne pouvez pas les retourner chez nous.Les articles en vente finale ou les cadeaux gratuits ne sont pas acceptés pour un retour.Pour être éligible à un retour, votre article doit être inutilisé et dans le même état que celui dans lequel vous l'avez reçu. Il doit également être dans son emballage d'origine.Après avoir reçu les instructions de retour de notre part, veuillez emballer vos articles retournés et déposer votre colis à la poste locale ou à un autre transporteur. Nous traiterons votre retour ou échange d'article dans les 3 à 5 jours ouvrables après réception. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Aucun retour ou échange ne peut être accepté si le produit a été produit sur mesure, y compris la taille personnalisée, la couleur personnalisée ou l'impression personnalisée.Besoin de plus d'aide, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
2.Politique de remboursement
Vous recevrez un remboursement intégral ou un crédit magasin de 100% après réception et vérification du colis retourné. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Veuillez noter que les frais d'expédition et tous les droits ou frais ne sont pas remboursables. Les frais d'expédition supplémentaires ne sont pas remboursables une fois le colis expédié. Vous êtes responsable du paiement de ces frais et nous ne pouvons pas les annuler ou les rembourser, même si la commande nous est retournée.Une fois que nous avons reçu et confirmé votre article retourné, nous vous enverrons un email pour vous informer que nous avons reçu votre article retourné. Nous vous informerons également de l'approbation ou du rejet de votre remboursement.Si vous avez des problèmes concernant le processus de remboursement, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
Description:Item number: C-160Wingspan: 1120 mm
Wing area: 14.3dm2
Full length: 840mm
Full weight: 580g
Material: EPOS
Outer package size: 22cm*22cm*72cm
Recommended Power System:
Motor: 2208 1800kv *2 (2212 motor cannot be used!)
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 54|
Show Original
A part of the QA has been auto-translated.
0
Q:
The instructions say I need GWS glue. what is that?
The instructions say I need GWS glue. what is that?
rubbish a 3s 2200 is a perfect fit underneath crossways butted up behind the front bulkhead above the front pair of wheels , you will just have to remove about a 5mm layer of foam from the fuz to make room for height of battery , done like this it wont need straps,velcro or hatches cut and the cg is spot on with the standard setup
rubbish a 3s 2200 is a perfect fit underneath crossways butted up behind the front bulkhead above the front pair of wheels , you will just have to remove about a 5mm layer of foam from the fuz to make room for height of battery , done like this it wont need straps,velcro or hatches cut and the cg is spot on with the standard setup
Answered by nick789 on 19/01/2020Helpful (0)
0
Q:
is the back hatch/ramp door on a servo? or do we open it by hand?
is the back hatch/ramp door on a servo? or do we open it by hand?
World is very small for shipping these days. I sometimes wait longer for things off other sites in my country to arrive than I wait for things from China. Crazy!
World is very small for shipping these days. I sometimes wait longer for things off other sites in my country to arrive than I wait for things from China. Crazy!
Only if you put it together, add a receiver and a transmitter and know how to use them - then it flies! See Andrew Newton on you tube.
Only if you put it together, add a receiver and a transmitter and know how to use them - then it flies! See Andrew Newton on you tube.
Answered by BG502556513 on 29/08/2021Helpful (0)
0
Q:
okay quick question I'm interested in the PNP one, is it already assembled what I mean is the motors assembled the servos I'm pretty sure that you would have to put the wing on and maybe the horizontal and the vertical stabilizers but is most of it already assembled or is it all in pieces and we have to do that?
okay quick question I'm interested in the PNP one, is it already assembled what I mean is the motors assembled the servos I'm pretty sure that you would have to put the wing on and maybe the horizontal and the vertical stabilizers but is most of it already assembled or is it all in pieces and we have to do that?
! Please avoid this Plane if you are a beginner or without experience of building a kit from scratch ! The only difference between the basic "Kit" and the "PnP" version is that with the "PnP" version you get the "Servos" and the "Esc"s ready wired and included. but not installed. which is left upto the builder to decide how to proceed.? !Very little help is given in the manufacturers supplied instructions! You will also need to source your own "TX" and suitable "RX"
! Please avoid this Plane if you are a beginner or without experience of building a kit from scratch ! The only difference between the basic "Kit" and the "PnP" version is that with the "PnP" version you get the "Servos" and the "Esc"s ready wired and included. but not installed. which is left upto the builder to decide how to proceed.? !Very little help is given in the manufacturers supplied instructions! You will also need to source your own "TX" and suitable "RX"
Answered by pglong on 25/08/2021Helpful (0)
0
Q:
What does PNP version of this plane precisely includes?
Is the controller included?
What does PNP version of this plane precisely includes?
Is the controller included?
That would depend on the propellor used. If it came with 5x4 four bladed propellors I would say yes. My PNP came with 1600kv motors and 5x4 four bladed props. On 2s the 5x4 props only drew about 4 amps and there was not enough thrust for flight. On 3s they drew 14 amps and made 170 watts of power which is more like it. I had already ordered new 2200mah 7.4V batteries so ended up using 7x4 three bladed props which are more suitable for motors in the 1400-1600 kv range on 7.4V. On 2s any two or three blade prop 7x4 to 8x4 should be ok. Even a 9x4 if it clears the fuselage.
That would depend on the propellor used. If it came with 5x4 four bladed propellors I would say yes. My PNP came with 1600kv motors and 5x4 four bladed props. On 2s the 5x4 props only drew about 4 amps and there was not enough thrust for flight. On 3s they drew 14 amps and made 170 watts of power which is more like it. _I had already ordered new 2200mah 7.4V batteries so ended up using 7x4 three bladed props which are more suitable for motors in the 1400-1600 kv range on 7.4V. On 2s any two or three blade prop 7x4 to 8x4 should be ok. Even a 9x4 if it clears the fuselage.
Answered by Phildo on 03/05/2025Helpful (0)
0
Q:
'm a beginner. What comes with the hercules kit. What more do I need to buy?
'm a beginner. What comes with the hercules kit. What more do I need to buy?
I agree not a beginner, I was, I did, I almost destroyed it on the first day - 15 minutes from perfect painted plane to almost torn in half - hot glue to the rescue, but it's not a forgiving beginner plane at all!!
I agree not a beginner, I was, I did, I almost destroyed it on the first day - 15 minutes from perfect painted plane to almost torn in half - hot glue to the rescue, but it's not a forgiving beginner plane at all!!
Answered by BG502556513 on 29/08/2021Helpful (0)
0
Q:
Does anyone know why 2200kv motors are discouraged?
Does anyone know why 2200kv motors are discouraged?
if you beef the wing up with a decent spar and carbon strips to the ends its ok ,i have one with 2 x *****kv for scale flying , and another one with 4 x brother hobby *****kv on 4s , 6inch hq tri blade props and differential thrust for crazy 3d flying . its about a 5-1 power ratio so careful throttle management is a must lol
if you beef the wing up with a decent spar and carbon strips to the ends its ok ,i have one with 2 x *****kv for scale flying , and another one with 4 x brother hobby *****kv on 4s , 6inch hq tri blade props and differential thrust for crazy 3d flying . its about a 5-1 power ratio so careful throttle management is a must lol
Does the plane have a gyroscope, does it balance itself in the air? Does it have a system that alerts when its battery is low? Thank you.
est ce que l’avion dispose d’un gyroscope, est ce qu’il s'équilibre tout seul dans l’air ? a-il un systèmes qui alerte lorsque sa batterie est faible ?
merci
ithink you can but pull up a copy of the manual on google and check it out...
ithink you can but pull up a copy of the manual on google and check it out...
Answered by BG131736331 on 29/12/2020Helpful (0)
0
Q:
Can someone explain to me how to use the FS-i6X receiver with the C-160 Cargo Trans? I can't connect the receiver to the RC plane because all the connections are the same. Is there some kind of adapter piece I can buy?
Can someone explain to me how to use the FS-i6X receiver with the C-160 Cargo Trans? I can't connect the receiver to the RC plane because all the connections are the same. Is there some kind of adapter piece I can buy?
You need a receiver. I bought the PNP version which comes with 2 ESCs connected in parallel and connected the common signal cable to my receiver, the Flysky iA6B. I was able to bind it by putting the bind plug in the top port of the iA6B (says B/VCC) and then the cable from the ESCs into Channel 3. Make sure the signal cable (white or sometimes yellow cable) is facing up and the black wire (sometimes brown) is facing down. All these orientations assume you are looking at the iA6B receiver with the stickers facing up. Anyways to bind you first turn off your transmitter (the FS-i6X) and then turn it back on while holding down the bind button. Then plug the bind cable into the receiver (FS-iA6B) and then plug the ESC into receiver and battery. There are plenty of videos of how to bind on YouTube.
You need a receiver. I bought the PNP version which comes with 2 ESCs connected in parallel and connected the common signal cable to my receiver, the Flysky iA6B. I was able to bind it by putting the bind plug in the top port of the iA6B (says B/VCC) and then the cable from the ESCs into Channel 3. Make sure the signal cable (white or sometimes yellow cable) is facing up and the black wire (sometimes brown) is facing down. All these orientations assume you are looking at the iA6B receiver with the stickers facing up. Anyways to bind you first turn off your transmitter (the FS-i6X) and then turn it back on while holding down the bind button. Then plug the bind cable into the receiver (FS-iA6B) and then plug the ESC into receiver and battery. There are plenty of videos of how to bind on YouTube.
Answered by skystone on 05/01/2020Helpful (0)
0
Q:
Creia que llevaba todo completo, me ha llegado sin motores, helices i servos ? ….. el kit me salio por 66,28 (este no lleva ?) , código prod: SKUA90570
Creia que llevaba todo completo, me ha llegado sin motores, helices i servos ? ….. el kit me salio por 66,28 (este no lleva ?) , código prod: SKUA90570