Eachine Mini Mustang P-51D/Mini F4U/Mini T-28/Spitfire/P40/A6M Zero RC Avion à voilure fixe Pièce de rechange 4 canaux Carte récepteur servo embarquée avec gyroscope
* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livraison standard gratuite pour les commandes de plus de 9,9 $
Politique de retour
Les articles retournés seront acceptés dans les 40 jours suivant la réception des marchandises. Les articles personnalisés ne peuvent pas être retournés ou échangés. Les articles achetés avec une carte-cadeau électronique ne peuvent être échangés que; les remboursements ne sont pas applicables.
Cadeau gratuit
Bienvenue sur Roymall, votre site Web professionnel pour l'achat de cadeaux de grand magasin premium. Nous apprécions et valorisons grandement votre soutien, et nous voulons exprimer notre gratitude en ajoutant une touche supplémentaire d'excitation à vos achats. Lorsque vous magasinez avec nous, vous profitez non seulement de produits de haute qualité qui améliorent votre style de vie, mais vous recevrez également un cadeau gratuit exclusif avec chaque commande que vous passez. Prêt à explorer notre collection et à trouver vos cadeaux parfaits ? Parcourez notre sélection d'articles de grand magasin premium, passez votre commande et attendez avec impatience l'excitation de recevoir votre cadeau gratuit avec votre achat.
Politique d'expédition
Nous nous efforcerons de vous livrer les articles après réception de vos commandes et de nous assurer qu'ils arrivent en toute sécurité. Les détails de livraison seront fournis dans votre email de confirmation.Dans la plupart des cas, les commandes sont traitées dans les 2 jours. Dans des circonstances spéciales, cela peut être retardé comme suit : Lorsque vous passez une commande le samedi, le dimanche ou un jour férié, cela sera retardé de 2 jours.Normalement, il faut 5 à 7 jours ouvrables (du lundi au vendredi) sans être affecté par un retard de vol ou d'autres facteurs environnementaux.Parce que notre service d'expédition est mondial, les délais de livraison dépendront de votre emplacement, donc cela peut prendre quelques jours et veuillez patienter si vous êtes dans des districts ou des pays éloignés.
1. Politique de retour et d'échange
Nous n'acceptons que les articles achetés sur roymall.com. Si vous achetez auprès de nos distributeurs locaux ou d'autres détaillants, vous ne pouvez pas les retourner chez nous.Les articles en vente finale ou les cadeaux gratuits ne sont pas acceptés pour un retour.Pour être éligible à un retour, votre article doit être inutilisé et dans le même état que celui dans lequel vous l'avez reçu. Il doit également être dans son emballage d'origine.Après avoir reçu les instructions de retour de notre part, veuillez emballer vos articles retournés et déposer votre colis à la poste locale ou à un autre transporteur. Nous traiterons votre retour ou échange d'article dans les 3 à 5 jours ouvrables après réception. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Aucun retour ou échange ne peut être accepté si le produit a été produit sur mesure, y compris la taille personnalisée, la couleur personnalisée ou l'impression personnalisée.Besoin de plus d'aide, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
2.Politique de remboursement
Vous recevrez un remboursement intégral ou un crédit magasin de 100% après réception et vérification du colis retourné. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Veuillez noter que les frais d'expédition et tous les droits ou frais ne sont pas remboursables. Les frais d'expédition supplémentaires ne sont pas remboursables une fois le colis expédié. Vous êtes responsable du paiement de ces frais et nous ne pouvons pas les annuler ou les rembourser, même si la commande nous est retournée.Une fois que nous avons reçu et confirmé votre article retourné, nous vous enverrons un email pour vous informer que nous avons reçu votre article retourné. Nous vous informerons également de l'approbation ou du rejet de votre remboursement.Si vous avez des problèmes concernant le processus de remboursement, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
Specification:
Brand: Eachine
Product Name: Onboard Servo Receive Board
Version: V1, V2 (optional)
Receiver: 2 in 1 integrated board
Servo: 2g plastic gear *2
Application:
V1 Version (one socket) is suitable forEachine Mini T-28.
V2 Version (four sockets) is suitable forEachine Mini Mustang P-51D V2/ BF109 V2/Mini F4U V2/ Spitfire V2/ P40 V2/ A6M Zero V2/ P47 V2.
Very happy to have this receiver, it's has build in GYRO. Can bind with Eachine transmitter and can play with the sensitivity with transmitter setting for Beginer(full GYRO), mid setting, and export(no GYRO ASSIST). Wonder this PCB can support 2S 7.4V Battery? Is very good for own build small air craft.
Very happy to have this receiver, it's has build in GYRO. Can bind with Eachine transmitter and can play with the sensitivity with transmitter setting for Beginer(full GYRO), mid setting, and export(no GYRO ASSIST). Wonder this PCB can support 2S 7.4V Battery? Is very good for own build small air craft.
Very happy to have this receiver, it's has build in GYRO. Can bind with Eachine transmitter and can play with the sensitivity with transmitter setting for Beginer(full GYRO), mid setting, and export(no GYRO ASSIST). Wonder this PCB can support 2S 7.4V Battery? Is very good for own build small air craft.
I was a little hesitant purchasing this to replace the one in my Velantex Sport Cub 500mm. Not sure why some reviewers have said they were not compatible but it works like a charm. I just had to solder the motor lead wires (don't throw your old one away, you might need it for reference) and it synced right up with the transmitter and now I'm back in the air.
I was a little hesitant purchasing this to replace the one in my Velantex Sport Cub 500mm. Not sure why some reviewers have said they were not compatible but it works like a charm. I just had to solder the motor lead wires (don't throw your old one away, you might need it for reference) and it synced right up with the transmitter and now I'm back in the air.
I was a little hesitant purchasing this to replace the one in my Velantex Sport Cub 500mm. Not sure why some reviewers have said they were not compatible but it works like a charm. I just had to solder the motor lead wires (don't throw your old one away, you might need it for reference) and it synced right up with the transmitter and now I'm back in the air.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 74|
Show Original
A part of the QA has been auto-translated.
0
Q:
Can you connect 2 motors to the board without damage to either board or motors? For twin motor plane?
Can you connect 2 motors to the board without damage to either board or motors? For twin motor plane?
Hi, how to connect the propeller motor to this receiver? one port is for aileron (3 pins) the other port is WIFI (4 pins). How about the motor? Thank you.
Hi, how to connect the propeller motor to this receiver? one port is for aileron (3 pins) the other port is WIFI (4 pins). How about the motor? Thank you.
Motor wire soldering positions are through holes on same edge of board as battery connector wires and capacitor. They are marked with + and - symbols on the PCB. See product pictures on website, or actual product if you already have it. Think motor wires are red and blue and so normal convention would mean red wire is +ve and blue -ve!? Hope this helps.
Motor wire soldering positions are through holes on same edge of board as battery connector wires and capacitor. They are marked with + and - symbols on the PCB. See product pictures on website, or actual product if you already have it. Think motor wires are red and blue and so normal convention would mean red wire is +ve and blue -ve!? Hope this helps.
I think this one is pre programmed for the servos to work as elevator and rudder. The board for the F22 might be the exact same board, but the servos are pre programmed on that one to run as dual elevator. As far as I can tell the F22 does not have any elevon mixing set up, which is a waste. I think this board is compatible with some of the multi protocol transmitter out there that are more hobby grade, like the Jumper T Lite 4in1 or the Radio master T16,and with that combo, I would assume that through the transmitter, you could set up the mixes to work with elevator, elevon, and alerons.
I think this one is pre programmed for the servos to work as elevator and rudder. The board for the F22 might be the exact same board, but the servos are pre programmed on that one to run as dual elevator. As far as I can tell the F22 does not have any elevon mixing set up, which is a waste. I think this board is compatible with some of the multi protocol transmitter out there that are more hobby grade, like the Jumper T Lite 4in1 or the Radio master T16,and with that combo, I would assume that through the transmitter, you could set up the mixes to work with elevator, elevon, and alerons.
If it is the standard receiver, it should bind as the RTF systems and only with the Volantex or Eachine transmitter, which binds automatically with each use on just about all Volantex fixed wing planes using the standard Volantex RTF transmitter. THIS DOES NOT USE A STANDARD PROTOCOL like DSMX or FlySky. I take a single transmitter with my Ranger 400-600 - Mini Warbirds and it binds with all on startup. Throttle Down-Up-Down arms the motor. Gyro can be calibrated with left stick left lower corner-right stick right lower corner simultaneously BEFORE arming the motor...as can servos be reversed by holding the appropriate stick fully in the direction desired BEFORE arming the motor. If using multiple planes make sure only the one you wish to fly is powered on. Hope that helps.
If it is the standard receiver, it should bind as the RTF systems and only with the Volantex or Eachine transmitter, which binds automatically with each use on just about all Volantex fixed wing planes using the standard Volantex RTF transmitter. THIS DOES NOT USE A STANDARD PROTOCOL like DSMX or FlySky. I take a single transmitter with my Ranger 400-600 - Mini Warbirds and it binds with all on startup. Throttle Down-Up-Down arms the motor. Gyro can be calibrated with left stick left lower corner-right stick right lower corner simultaneously BEFORE arming the motor...as can servos be reversed by holding the appropriate stick fully in the direction desired BEFORE arming the motor. If using multiple planes make sure only the one you wish to fly is powered on. Hope that helps.
Answered by margotcopeland on 16/08/2020Helpful (0)
0
Q:
it is compatible with volantex super cub 500 yes or no
it is compatible with volantex super cub 500 yes or no
Yes,This is everything. Receiver, ESC, Gyros, 2 servos. Wires from a motor solder directly to the board. There is a jack for a third servo. The two servos on board normally control elevator and rudder. The servo jack is for ailerons.
Yes,This is everything. Receiver, ESC, Gyros, 2 servos. Wires from a motor solder directly to the board. There is a jack for a third servo. The two servos on board normally control elevator and rudder. The servo jack is for ailerons.