* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livraison standard gratuite pour les commandes de plus de 9,9 $
Politique de retour
Les articles retournés seront acceptés dans les 40 jours suivant la réception des marchandises. Les articles personnalisés ne peuvent pas être retournés ou échangés. Les articles achetés avec une carte-cadeau électronique ne peuvent être échangés que; les remboursements ne sont pas applicables.
Cadeau gratuit
Bienvenue sur Roymall, votre site Web professionnel pour l'achat de cadeaux de grand magasin premium. Nous apprécions et valorisons grandement votre soutien, et nous voulons exprimer notre gratitude en ajoutant une touche supplémentaire d'excitation à vos achats. Lorsque vous magasinez avec nous, vous profitez non seulement de produits de haute qualité qui améliorent votre style de vie, mais vous recevrez également un cadeau gratuit exclusif avec chaque commande que vous passez. Prêt à explorer notre collection et à trouver vos cadeaux parfaits ? Parcourez notre sélection d'articles de grand magasin premium, passez votre commande et attendez avec impatience l'excitation de recevoir votre cadeau gratuit avec votre achat.
Politique d'expédition
Nous nous efforcerons de vous livrer les articles après réception de vos commandes et de nous assurer qu'ils arrivent en toute sécurité. Les détails de livraison seront fournis dans votre email de confirmation.Dans la plupart des cas, les commandes sont traitées dans les 2 jours. Dans des circonstances spéciales, cela peut être retardé comme suit : Lorsque vous passez une commande le samedi, le dimanche ou un jour férié, cela sera retardé de 2 jours.Normalement, il faut 5 à 7 jours ouvrables (du lundi au vendredi) sans être affecté par un retard de vol ou d'autres facteurs environnementaux.Parce que notre service d'expédition est mondial, les délais de livraison dépendront de votre emplacement, donc cela peut prendre quelques jours et veuillez patienter si vous êtes dans des districts ou des pays éloignés.
1. Politique de retour et d'échange
Nous n'acceptons que les articles achetés sur roymall.com. Si vous achetez auprès de nos distributeurs locaux ou d'autres détaillants, vous ne pouvez pas les retourner chez nous.Les articles en vente finale ou les cadeaux gratuits ne sont pas acceptés pour un retour.Pour être éligible à un retour, votre article doit être inutilisé et dans le même état que celui dans lequel vous l'avez reçu. Il doit également être dans son emballage d'origine.Après avoir reçu les instructions de retour de notre part, veuillez emballer vos articles retournés et déposer votre colis à la poste locale ou à un autre transporteur. Nous traiterons votre retour ou échange d'article dans les 3 à 5 jours ouvrables après réception. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Aucun retour ou échange ne peut être accepté si le produit a été produit sur mesure, y compris la taille personnalisée, la couleur personnalisée ou l'impression personnalisée.Besoin de plus d'aide, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
2.Politique de remboursement
Vous recevrez un remboursement intégral ou un crédit magasin de 100% après réception et vérification du colis retourné. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Veuillez noter que les frais d'expédition et tous les droits ou frais ne sont pas remboursables. Les frais d'expédition supplémentaires ne sont pas remboursables une fois le colis expédié. Vous êtes responsable du paiement de ces frais et nous ne pouvons pas les annuler ou les rembourser, même si la commande nous est retournée.Une fois que nous avons reçu et confirmé votre article retourné, nous vous enverrons un email pour vous informer que nous avons reçu votre article retourné. Nous vous informerons également de l'approbation ou du rejet de votre remboursement.Si vous avez des problèmes concernant le processus de remboursement, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
Specifications:
Voltage measurement range: 0.0V-100V
Current test range: 0-999mA, 0-10A
Power supply range: DC4-30.0V
Voltage error: ±0.1%
Current error: ±1%
Working current: < 20mA
Refresh rate: about 300mS once
Display mode: double three-digit 0.28" LED digital tube
Works as expected. Starts working at a supply voltage of 3.3V. It then draws 6.4 mA. At 5V supply the consumption is 10 mA and it remains at 10 mA up to at least 30V. Accuracy is not the best. For 3.3V with 3.3V supply voltage the error was 12%. For voltage above 4V the accuracy is about 1%, it is however trimmable by some trimpots that are accessible.
Works as expected. Starts working at a supply voltage of 3.3V. It then draws 6.4 mA. At 5V supply the consumption is 10 mA and it remains at 10 mA up to at least 30V. Accuracy is not the best. For 3.3V with 3.3V supply voltage the error was 12%. For voltage above 4V the accuracy is about 1%, it is however trimmable by some trimpots that are accessible.
Works as expected. Starts working at a supply voltage of 3.3V. It then draws 6.4 mA. At 5V supply the consumption is 10 mA and it remains at 10 mA up to at least 30V. Accuracy is not the best. For 3.3V with 3.3V supply voltage the error was 12%. For voltage above 4V the accuracy is about 1%, it is however trimmable by some trimpots that are accessible.
заводская калибровка тока оказалась просто прекрасна - отклонений нет во всем диапазоне. шунт 5 мОм. По напряжению шкала нелинейная - низкие напряжения занижает, высокие завышает (вместо 5,7 показывает 5,6В ; вместо 24.1 показывает 24.3 В ). Замеры проводились при внешнем питании 5В. Скорость обновления невысокая, около двух раз в секунду.
-----
the factory current calibration was just fine - there are no deviations in the entire range. shunt of 5 mω. The voltage scale is non-linear - low voltages are underestimated, high voltages are overstated (instead of 5.7, it shows 5.6 V; instead of 24.1, it shows 24.3 V). Measurements were carried out with an external power supply of 5V. The update rate is low, about two times per second.
The factory calibration of the current turned out to be just fine - there are no deviations in the whole range. Shunt 5m. Non-linear scale - low voltages underestimate, high voltages overestimate (instead of 5.7 shows 5.6V; instead of 24.1 shows 24.3 In ). Measurements were made with external power supply of 5V. The refresh rate is low, about twice per second.
-----
the factory current calibration was just fine - there are no deviations in the entire range. shunt of 5 mω. The voltage scale is non-linear - low voltages are underestimated, high voltages are overstated (instead of 5.7, it shows 5.6 V; instead of 24.1, it shows 24.3 V). Measurements were carried out with an external power supply of 5V. The update rate is low, about two times per second.
The factory calibration of the current turned out to be just fine - there are no deviations in the whole range. Shunt 5m. Non-linear scale - low voltages underestimate, high voltages overestimate (instead of 5.7 shows 5.6V; instead of 24.1 shows 24.3 In ). Measurements were made with external power supply of 5V. The refresh rate is low, about twice per second.
-----
the factory current calibration was just fine - there are no deviations in the entire range. shunt of 5 mω. The voltage scale is non-linear - low voltages are underestimated, high voltages are overstated (instead of 5.7, it shows 5.6 V; instead of 24.1, it shows 24.3 V). Measurements were carried out with an external power supply of 5V. The update rate is low, about two times per second.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 70|
Show Original
A part of the QA has been auto-translated.
0
Q:
Does this meter sense DC current on its own, or does it need an external shunt? THANK YOU!!!
Does this meter sense DC current on its own, or does it need an external shunt? THANK YOU!!!
The wiring diagrams depicted are ( plus) common. Is there any (-) common wiring configuration? To place meter voltage / current on a twin voltage supply (one meter for each output voltage / current) I'd prefer a (-) common configuration so the (-) negative outputs are common.
The wiring diagrams depicted are ( plus) common. Is there any (-) common wiring configuration? To place meter voltage / current on a twin voltage supply (one meter for each output voltage / current) I'd prefer a (-) common configuration so the (-) negative outputs are common.
https://www.banggood.com/Geekcreit-Mini-Digital-Voltmeter-Ammeter-DC-100V-10A-Voltmeter-Current-Meter-Tester-BlueRed-Dual-LED-Display-p-1416489.html?cur_warehouse=CN In the picture below the description
https://www.banggood.com/Geekcreit-Mini-Digital-Voltmeter-Ammeter-DC-100V-10A-Voltmeter-Current-Meter-Tester-BlueRed-Dual-LED-Display-p-1416489.html?cur_warehouse=CN In the picture below the description
Answered by wujiahui on 24/04/2019Helpful (0)
0
Q:
Do you have a wiring diagram of the Volt/Amp meter?
Do you have a wiring diagram of the Volt/Amp meter?
There are diagrams in the product description. Thin red and black supply operating power to the meter. Thick red and black connect to the circuit being measured for voltage. The third thin wire (white or yellow) connects to the measured circuit, to read current.
There are diagrams in the product description. Thin red and black supply operating power to the meter. Thick red and black connect to the circuit being measured for voltage. The third thin wire (white or yellow) connects to the measured circuit, to read current.
Answered by Grumblydore on 28/02/2022Helpful (0)
0
Q:
Is it useful to connect to the electricity of the car
Is it useful to connect to the electricity of the car
ThePSU that powers the unit can be independent from the power source you are measuring if that's what you mean! But generally I think components like this are meant to be part of a designed system that utilises the same PSU. It depends on your application!
ThePSU that powers the unit can be independent from the power source you are measuring if that's what you mean! But generally I think components like this are meant to be part of a designed system that utilises the same PSU. It depends on your application!
I don't see the electrical drawing anywhere under the product description. Exactly where is added to the Internet wiring diagram? What link is it currently available on?
-
I don't know the difference between them and them description. Does WHERE is the wiring chart on the Internet? What link is available?
Sehol nem látom az elektromos rajzot a termék leírása alatt. Pontosan HOL van hozzá az interneten bekötési rajz? Milyen linken érhető el aktuálisan?
-
I don't see the electrical drawing anywhere under the product description. Exactly WHERE is the wiring diagram on the Internet? What link is currently available?
Click the link that says “See all description”. The connection diagrams showing how to use this tester to monitor a circuit are there.
However, perhaps what you are really asking for, is a circuit diagram of the tester itself? I don’t think the manufacturer is going to give you that detail.
Click the link that says “See all description”. The connection diagrams showing how to use this tester to monitor a circuit are there.
However, perhaps what you are really asking for, is a circuit diagram of the tester itself? I don’t think the manufacturer is going to give you that detail.
Answered by Grumblydore on 15/03/2022Helpful (0)
0
Q:
No hint where to find a schematic helped me, but I finally got it working, with the only problem that the voltage is tent times too low (0.14 instead of 14.?V). Is it possible to adjust that?
No hint where to find a schematic helped me, but I finally got it working, with the only problem that the voltage is tent times too low (0.14 instead of 14.?V). Is it possible to adjust that?