* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livraison standard gratuite pour les commandes de plus de 9,9 $
Politique de retour
Les articles retournés seront acceptés dans les 40 jours suivant la réception des marchandises. Les articles personnalisés ne peuvent pas être retournés ou échangés. Les articles achetés avec une carte-cadeau électronique ne peuvent être échangés que; les remboursements ne sont pas applicables.
Cadeau gratuit
Bienvenue sur Roymall, votre site Web professionnel pour l'achat de cadeaux de grand magasin premium. Nous apprécions et valorisons grandement votre soutien, et nous voulons exprimer notre gratitude en ajoutant une touche supplémentaire d'excitation à vos achats. Lorsque vous magasinez avec nous, vous profitez non seulement de produits de haute qualité qui améliorent votre style de vie, mais vous recevrez également un cadeau gratuit exclusif avec chaque commande que vous passez. Prêt à explorer notre collection et à trouver vos cadeaux parfaits ? Parcourez notre sélection d'articles de grand magasin premium, passez votre commande et attendez avec impatience l'excitation de recevoir votre cadeau gratuit avec votre achat.
Politique d'expédition
Nous nous efforcerons de vous livrer les articles après réception de vos commandes et de nous assurer qu'ils arrivent en toute sécurité. Les détails de livraison seront fournis dans votre email de confirmation.Dans la plupart des cas, les commandes sont traitées dans les 2 jours. Dans des circonstances spéciales, cela peut être retardé comme suit : Lorsque vous passez une commande le samedi, le dimanche ou un jour férié, cela sera retardé de 2 jours.Normalement, il faut 5 à 7 jours ouvrables (du lundi au vendredi) sans être affecté par un retard de vol ou d'autres facteurs environnementaux.Parce que notre service d'expédition est mondial, les délais de livraison dépendront de votre emplacement, donc cela peut prendre quelques jours et veuillez patienter si vous êtes dans des districts ou des pays éloignés.
1. Politique de retour et d'échange
Nous n'acceptons que les articles achetés sur roymall.com. Si vous achetez auprès de nos distributeurs locaux ou d'autres détaillants, vous ne pouvez pas les retourner chez nous.Les articles en vente finale ou les cadeaux gratuits ne sont pas acceptés pour un retour.Pour être éligible à un retour, votre article doit être inutilisé et dans le même état que celui dans lequel vous l'avez reçu. Il doit également être dans son emballage d'origine.Après avoir reçu les instructions de retour de notre part, veuillez emballer vos articles retournés et déposer votre colis à la poste locale ou à un autre transporteur. Nous traiterons votre retour ou échange d'article dans les 3 à 5 jours ouvrables après réception. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Aucun retour ou échange ne peut être accepté si le produit a été produit sur mesure, y compris la taille personnalisée, la couleur personnalisée ou l'impression personnalisée.Besoin de plus d'aide, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
2.Politique de remboursement
Vous recevrez un remboursement intégral ou un crédit magasin de 100% après réception et vérification du colis retourné. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Veuillez noter que les frais d'expédition et tous les droits ou frais ne sont pas remboursables. Les frais d'expédition supplémentaires ne sont pas remboursables une fois le colis expédié. Vous êtes responsable du paiement de ces frais et nous ne pouvons pas les annuler ou les rembourser, même si la commande nous est retournée.Une fois que nous avons reçu et confirmé votre article retourné, nous vous enverrons un email pour vous informer que nous avons reçu votre article retourné. Nous vous informerons également de l'approbation ou du rejet de votre remboursement.Si vous avez des problèmes concernant le processus de remboursement, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
Specifications:
Size: Approx. 5.7x3x1cm/ 2.24x1.18x0.39"
Advantage:
1. Open-source
2. Interactive
3. Programmable
4. Low cost
5. Simple
6. Smart
Wi-Fi enabled
Compatible -like hardware IO
Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
Code compatible , but interactively in Lua script.
Nodejs style network API
Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
Greatly speed up your IOT application developing process.
Lowest cost WI-FI
It is a tiny board, based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board
Package Included:
1/3/5/10/20 x NodeMcu Lua CH340G ESP8266 WIFI Internet Module (optional)
Fantastic quality board for a fantastic price. I already had the CH340 USB driver installed for a different board so the NodeMCU worked right away with Arduino IDE. There are 3 main ways to use this:
- Program it using Lua, I believe the firmware it comes with supports this although I didn't try it.
- Write code for it in Arduino IDE (C++). This is the most flexible and highest-performance option, and gives you access to extensive libraries available in Arduino IDE with one button click. Environment is very similar to coding for Arduino.
- Use it as a "dumb" WiFi peripheral with AT commands sent over the serial port from another CPU (Hayes modem style). The firmware you need to load for this is fairly easily found on the web.
Note that it's wider than some other NodeMCU boards so it doesn't leave any connection points available beside it when on a standard project board, but this is easily solved using some non-stranded hookup wire connected underneath.
Fantastic quality board for a fantastic price. I already had the CH340 USB driver installed for a different board so the NodeMCU worked right away with Arduino IDE. There are 3 main ways to use this:
- Program it using Lua, I believe the firmware it comes with supports this although I didn't try it.
- Write code for it in Arduino IDE (C++). This is the most flexible and highest-performance option, and gives you access to extensive libraries available in Arduino IDE with one button click. Environment is very similar to coding for Arduino.
- Use it as a "dumb" WiFi peripheral with AT commands sent over the serial port from another CPU (Hayes modem style). The firmware you need to load for this is fairly easily found on the web.
Note that it's wider than some other NodeMCU boards so it doesn't leave any connection points available beside it when on a standard project board, but this is easily solved using some non-stranded hookup wire connected underneath.
Fantastic quality board for a fantastic price. I already had the CH340 USB driver installed for a different board so the NodeMCU worked right away with Arduino IDE. There are 3 main ways to use this:
- Program it using Lua, I believe the firmware it comes with supports this although I didn't try it.
- Write code for it in Arduino IDE (C++). This is the most flexible and highest-performance option, and gives you access to extensive libraries available in Arduino IDE with one button click. Environment is very similar to coding for Arduino.
- Use it as a "dumb" WiFi peripheral with AT commands sent over the serial port from another CPU (Hayes modem style). The firmware you need to load for this is fairly easily found on the web.
Note that it's wider than some other NodeMCU boards so it doesn't leave any connection points available beside it when on a standard project board, but this is easily solved using some non-stranded hookup wire connected underneath.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-26 of 26|
Show Original
A part of the QA has been auto-translated.
0
Q:
Hello, is this NodeMcu ESP8266 ESP-12F or ESP-12E?
olá, está placa é o NodeMcu ESP8266 ESP-12F ou ESP-12E ?
Arduino ide doesn't automatically have this board. You have to add it.
You need to open Arduino IDE, choose File-->Preferences and then add this URL: ***** into the section that says: Additional Boards Manager (urls), save or OK, Then you have to go to Tools--> Boards Manager and add 8266 to the list of boards.
If you are not sure, try this step by step tutorial at *****
Arduino ide doesn't automatically have this board. You have to add it.
You need to open Arduino IDE, choose File-->Preferences and then add this URL: ***** into the section that says: Additional Boards Manager (urls), save or OK, Then you have to go to Tools--> Boards Manager and add 8266 to the list of boards.
If you are not sure, try this step by step tutorial at *****
Answered by davidcherubin on 11/11/2020Helpful (0)
0
Q:
Are the data pins 3.3v or 5v tolerant? Clearly the board accepts 5v, and there is a voltage regulator to drop the supplied voltage to 3.3v - my understanding is that the ESP8266 is only 3.3v tolerant - so if you supply 5v to VIN do the data pins only provide 3.3v? Can you interface 5v I2C modules to this device, or only 3.3v I2C modules?
Are the data pins 3.3v or 5v tolerant? Clearly the board accepts 5v, and there is a voltage regulator to drop the supplied voltage to 3.3v - my understanding is that the ESP8266 is only 3.3v tolerant - so if you supply 5v to VIN do the data pins only provide 3.3v? Can you interface 5v I2C modules to this device, or only 3.3v I2C modules?
Is this module compatible with the Geekcreit UNO R3 ?
https://www.banggood.com/Geekcreit-UNO-R3-Basic-Learning-Starter-Kits-Upgrade-Version-for-Arduino-Carton-Box-Packaging-p-970714.html
Hello, is this module compatible with the Geekcreit UNO R3 ? https://www.banggood.com/Geekcreit-UNO-R3-Basic-Learning-Starter-Kits-Upgrade-Version-for-Arduino-Carton-Box-Packaging-p-970714.html
I cannot boot nodemcu from Vin with voltage of 5 volts. The dev board only boot from USB. Can you please tell me how to power the unit without using the usb?
I cannot boot nodemcu from Vin with voltage of 5 volts. The dev board only boot from USB. Can you please tell me how to power the unit without using the usb?
Wasn't able to edit my previous question so here is the modified question:This is not the same as previous V3. Pin Rows are wider: 1.1in vs 0.9in and there was a LED on the board connected to D0 that doesn't seem to exist. The ESP8266 Wifi chip seems to run warmer than the previous V3 but is much cooler than the super hot V4. The builtin LED seems to be controlled by GPIO 02 (D4) and not GPIO 16 (D0). It has Ver 0.1 marked on the board near D0. If this is really a V3 devkit, how many different versions are available?
Wasn't able to edit my previous question so here is the modified question:This is not the same as previous V3. Pin Rows are wider: 1.1in vs 0.9in and there was a LED on the board connected to D0 that doesn't seem to exist. The ESP8266 Wifi chip seems to run warmer than the previous V3 but is much cooler than the super hot V4. The builtin LED seems to be controlled by GPIO 02 (D4) and not GPIO 16 (D0). It has Ver 0.1 marked on the board near D0. If this is really a V3 devkit, how many different versions are available?
You have to enter the ssid and password to your WiFi in your code. The device will then connect to the network you specified. Look at example code to see how it's done
You have to enter the ssid and password to your WiFi in your code. The device will then connect to the network you specified. Look at example code to see how it's done
Answered by BG335539323 on 10/03/2022Helpful (0)
0
Q:
This is not the same as previous V3. Pin Rows are wider: 1.1in vs 0.9in and there was a LED on the board connected to D4 that doesn't seem to exist. The ESP8266 Wifi chip seems to run warmer than the previous V3 but is much cooler than the super hot V4. Is this really a V3 devkit?
This is not the same as previous V3. Pin Rows are wider: 1.1in vs 0.9in and there was a LED on the board connected to D4 that doesn't seem to exist. The ESP8266 Wifi chip seems to run warmer than the previous V3 but is much cooler than the super hot V4. Is this really a V3 devkit?