* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livraison standard gratuite pour les commandes de plus de 9,9 $
Politique de retour
Les articles retournés seront acceptés dans les 40 jours suivant la réception des marchandises. Les articles personnalisés ne peuvent pas être retournés ou échangés. Les articles achetés avec une carte-cadeau électronique ne peuvent être échangés que; les remboursements ne sont pas applicables.
Cadeau gratuit
Bienvenue sur Roymall, votre site Web professionnel pour l'achat de cadeaux de grand magasin premium. Nous apprécions et valorisons grandement votre soutien, et nous voulons exprimer notre gratitude en ajoutant une touche supplémentaire d'excitation à vos achats. Lorsque vous magasinez avec nous, vous profitez non seulement de produits de haute qualité qui améliorent votre style de vie, mais vous recevrez également un cadeau gratuit exclusif avec chaque commande que vous passez. Prêt à explorer notre collection et à trouver vos cadeaux parfaits ? Parcourez notre sélection d'articles de grand magasin premium, passez votre commande et attendez avec impatience l'excitation de recevoir votre cadeau gratuit avec votre achat.
Politique d'expédition
Nous nous efforcerons de vous livrer les articles après réception de vos commandes et de nous assurer qu'ils arrivent en toute sécurité. Les détails de livraison seront fournis dans votre email de confirmation.Dans la plupart des cas, les commandes sont traitées dans les 2 jours. Dans des circonstances spéciales, cela peut être retardé comme suit : Lorsque vous passez une commande le samedi, le dimanche ou un jour férié, cela sera retardé de 2 jours.Normalement, il faut 5 à 7 jours ouvrables (du lundi au vendredi) sans être affecté par un retard de vol ou d'autres facteurs environnementaux.Parce que notre service d'expédition est mondial, les délais de livraison dépendront de votre emplacement, donc cela peut prendre quelques jours et veuillez patienter si vous êtes dans des districts ou des pays éloignés.
1. Politique de retour et d'échange
Nous n'acceptons que les articles achetés sur roymall.com. Si vous achetez auprès de nos distributeurs locaux ou d'autres détaillants, vous ne pouvez pas les retourner chez nous.Les articles en vente finale ou les cadeaux gratuits ne sont pas acceptés pour un retour.Pour être éligible à un retour, votre article doit être inutilisé et dans le même état que celui dans lequel vous l'avez reçu. Il doit également être dans son emballage d'origine.Après avoir reçu les instructions de retour de notre part, veuillez emballer vos articles retournés et déposer votre colis à la poste locale ou à un autre transporteur. Nous traiterons votre retour ou échange d'article dans les 3 à 5 jours ouvrables après réception. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Aucun retour ou échange ne peut être accepté si le produit a été produit sur mesure, y compris la taille personnalisée, la couleur personnalisée ou l'impression personnalisée.Besoin de plus d'aide, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
2.Politique de remboursement
Vous recevrez un remboursement intégral ou un crédit magasin de 100% après réception et vérification du colis retourné. Le remboursement sera traité et crédité automatiquement sur votre méthode de paiement d'origine.Veuillez noter que les frais d'expédition et tous les droits ou frais ne sont pas remboursables. Les frais d'expédition supplémentaires ne sont pas remboursables une fois le colis expédié. Vous êtes responsable du paiement de ces frais et nous ne pouvons pas les annuler ou les rembourser, même si la commande nous est retournée.Une fois que nous avons reçu et confirmé votre article retourné, nous vous enverrons un email pour vous informer que nous avons reçu votre article retourné. Nous vous informerons également de l'approbation ou du rejet de votre remboursement.Si vous avez des problèmes concernant le processus de remboursement, veuillez nous contacter. service@roymall.com ou Whatsapp: +447549870296
Installation Picture PleaseClick Hereto see and install
This combo is not suggested to use 3s 11.1v battery,it will be easily burned
Description:
Item Name:Brushless Combo set(upgraded parts)
Material:Metal and plastic
Color:As shown
Compatible Models:Wltoys 144001 124018 124019 1/14 rc car vehicles models
Recommended ! Ordered the full kit and did upgrade my wltoys 144001 whit the motor, ESC and steering servo. And it fits perfectly. Still using the 2S 1500Ma lipo however the ESC can handle 120Amps and 2-4S lipo's . Currently the max speed is as leas as stock motor.
Just ordered the wltoys Program Card , this was not visibel at this upgrade kit product page...
Also the transmitter in this kit does its job OK .
FPV has been added before , using second stock lipo.
Thanks Banggood !
Recommended ! Ordered the full kit and did upgrade my wltoys 144001 whit the motor, ESC and steering servo. And it fits perfectly. Still using the 2S 1500Ma lipo however the ESC can handle 120Amps and 2-4S lipo's . Currently the max speed is as leas as stock motor.
Just ordered the wltoys Program Card , this was not visibel at this upgrade kit product page...
Also the transmitter in this kit does its job OK .
FPV has been added before , using second stock lipo.
Thanks Banggood !
Recommended ! Ordered the full kit and did upgrade my wltoys 144001 whit the motor, ESC and steering servo. And it fits perfectly. Still using the 2S 1500Ma lipo however the ESC can handle 120Amps and 2-4S lipo's . Currently the max speed is as leas as stock motor.
Just ordered the wltoys Program Card , this was not visibel at this upgrade kit product page...
Also the transmitter in this kit does its job OK .
FPV has been added before , using second stock lipo.
My order came quickly, thank you. But I can't make the receiver transmitter settings. servo and esc are working correctly but I can't start the motor for back and forth motion. The receiver has deviated from the factory settings. do you have a blr video to watch these settings and link? Can you help please.
My order came quickly, thank you. But I can't make the receiver transmitter settings. servo and esc are working correctly but I can't start the motor for back and forth motion. The receiver has deviated from the factory settings. do you have a blr video to watch these settings and link? Can you help please.
My order came quickly, thank you. But I can't make the receiver transmitter settings. servo and esc are working correctly but I can't start the motor for back and forth motion. The receiver has deviated from the factory settings. do you have a blr video to watch these settings and link? Can you help please.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 151|
Show Original
A part of the QA has been auto-translated.
0
Q:
Has anyone tried using a 3s lipo with this setup?
And will it be safe to do so?
Has anyone tried using a 3s lipo with this setup?
And will it be safe to do so?
I installed and plugged everything in correctly.
But wqeder the servo still the motor works.
The ESC flashes red and beeps permanently (beep, beep, beep, beep)
What can I do? Where's the fault? It does not respond to the remote.
Ich habe alles korrekt eingebaut und angeschlossen.
Aber wqeder die Servo noch der Motor funktioniert.
Das ESC blinkt rot und piept dauerhaft (piep, piep, piep, piep)
Was kann ich tun? Wo liegt der Fehler. Es reagiert nicht auf die Fernbedienung.
omg I know you've probably already figured this out but maybe others will have this problem and this nearly drove me insane when I installed this kit as well. I spent three days trying to figure out the same exact issue before I realized what it was. I did not need to pair this transmitter and receiver, they already came paired, the issue is with the throttle dial to control the throttle trim. the trim is not set exactly to match the printing on the controller. so on mine for example, I have to have it set to one which is actually zero for me. just slowly turn the throttle trim dial very slowly down a little and up a little while the transmitter is turned on and as soon as you find that sweet spot, it will stop beeping and play a little tune to let you know it's connected. it will be the sweetest sound you've ever heard after going insane for 4 days trying to figure it out!
omg I know you've probably already figured this out but maybe others will have this problem and this nearly drove me insane when I installed this kit as well. I spent three days trying to figure out the same exact issue before I realized what it was. I did not need to pair this transmitter and receiver, they already came paired, the issue is with the throttle dial to control the throttle trim. the trim is not set exactly to match the printing on the controller. so on mine for example, I have to have it set to one which is actually zero for me. just slowly turn the throttle trim dial very slowly down a little and up a little while the transmitter is turned on and as soon as you find that sweet spot, it will stop beeping and play a little tune to let you know it's connected. it will be the sweetest sound you've ever heard after going insane for 4 days trying to figure it out!
ca 300 Meter habe das selbe Kit verbaut mit kleinen Anpassungen an meinem RC Car hat alles ohne Probleme gepasst auf jedenfall gut verarbeitet und dermaßen schnell
about 300 meters have installed the same kit with small adaptations to my RC car has everything fit without problems at any case well processed and so fast
Plug and play for the most part, throttle punch seems to be set to low. You’ll need the program card to unlock all potential. Have it in my wltoys L959, cogs a bit but it’s a 4:1 gear ratio. Easily will do 60-70kmh on a 2cell
Plug and play for the most part, throttle punch seems to be set to low. You’ll need the program card to unlock all potential. Have it in my wltoys L959, cogs a bit but it’s a 4:1 gear ratio. Easily will do 60-70kmh on a 2cell
installed entire kit and as soon as I turn it on, it just starts beeping and doesn't stop. The instructions are written in Chinese language which I do not understand. anyone go through this? I would greatly appreciate any advice on this
installed entire kit and as soon as I turn it on, it just starts beeping and doesn't stop. The instructions are written in Chinese language which I do not understand. anyone go through this? I would greatly appreciate any advice on this
Hi,this upgraded brushless combo can use with 2-3s lipo battery,for the battery capacity,you need to check if the wltoys rc car battery tray is enough to handle and install
Hi,this upgraded brushless combo can use with 2-3s lipo battery,for the battery capacity,you need to check if the wltoys rc car battery tray is enough to handle and install
I installed and plugged everything in correctly.
But wqeder the servo still the motor works.
The ESC flashes red and beeps permanently (beep, beep, beep, beep)
What can I do? Where's the fault? It does not respond to the remote.
A:
omg I know you've probably already figured this out but maybe others will have this problem and this nearly drove me insane when I installed this kit as well. I spent three days trying to figure out the same exact issue before I realized what it was. I did not need to pair this transmitter and receiver, they already came paired, the issue is with the throttle dial to control the throttle trim. the trim is not set exactly to match the printing on the controller. so on mine for example, I have to have it set to one which is actually zero for me. just slowly turn the throttle trim dial very slowly down a little and up a little while the transmitter is turned on and as soon as you find that sweet spot, it will stop beeping and play a little tune to let you know it's connected. it will be the sweetest sound you've ever heard after going insane for 4 days trying to figure it out! see less
Answered by LilB281 on May 17,2022
This might be your answer. Answer no 2 on the product page.
I installed and plugged everything in correctly.
But wqeder the servo still the motor works.
The ESC flashes red and beeps permanently (beep, beep, beep, beep)
What can I do? Where's the fault? It does not respond to the remote.
A:
omg I know you've probably already figured this out but maybe others will have this problem and this nearly drove me insane when I installed this kit as well. I spent three days trying to figure out the same exact issue before I realized what it was. I did not need to pair this transmitter and receiver, they already came paired, the issue is with the throttle dial to control the throttle trim. the trim is not set exactly to match the printing on the controller. so on mine for example, I have to have it set to one which is actually zero for me. just slowly turn the throttle trim dial very slowly down a little and up a little while the transmitter is turned on and as soon as you find that sweet spot, it will stop beeping and play a little tune to let you know it's connected. it will be the sweetest sound you've ever heard after going insane for 4 days trying to figure it out! see less
Answered by LilB281 on May 17,2022
This might be your answer. Answer no 2 on the product page.
Answered by Whiskers on 23/07/2023Helpful (0)
0
Q:
I have the 144001, how do you fit all the electronics under the shell/body of the car without damaging something?
I have the 144001, how do you fit all the electronics under the shell/body of the car without damaging something?
so id be using this on my rock crawler. its a 1/12 but im tryingnto make it in to a trugy kinda i want a lil more speed but i also still wanna crawl will this work??
so id be using this on my rock crawler. its a 1/12 but im tryingnto make it in to a trugy kinda i want a lil more speed but i also still wanna crawl will this work??